date | miles | system | 19 records found |
89 PC |
---|
0000-00-00 | 17396 | engi | I purchased a replacement engine from a 1990 PC800 at a cost of $600. It has about 15000 miles on it. I am still looking for a shop that will install it. I have checked one Honda dealer and two independent shops, but no one works on older bikes. I got a referral to a guy who works at the local S... |
0000-00-00 | 17396 | engi | I purchased a replacement engine from a 1990 PC800 at a cost of $600. It has about 15000 miles on it. I am still looking for a shop that will install it. I have checked one Honda dealer and two independent shops, but no one works on older bikes. I got a referral to a guy who works at the local S... |
2001-08-13 | 17110 | misc | Bought from individual for $2500. Rifle shield and Honda backrest are the only options. |
2001-08-13 | 17110 | elec | Bike has new battery. Previous owner had installed used stator, which had failed again. Ordered Electrex stator. |
2001-08-13 | 17110 | engi | Clutch is slipping. Ordered clutch disks from Bike Bandit. |
2001-08-13 | 17110 | body | Found broken plastic on the corner of a cover piece under seat. Ordered a Plastifix kit. |
2001-10-09 | 17224 | engi | Several parts on backorder. |
2001-10-09 | 17224 | elec | Stator completely failed, so I parked it. |
2001-10-09 | 17224 | body | Stripped all plastic and found several cracks and breaks. Plastifix works, but is messy. |
2002-02-12 | 17224 | misc | Bought a new Wong Wing for the bike, just becuase they look cool. |
2003-07-14 | 17224 | body | All plastic has been repaired and looks good. I used epoxy and silica, which is easier, stronger, and cheaper than Plastifix. |
2003-07-28 | 17224 | body | New job leaves no time to work on the bike, so I took the plastic to Maaco for paint |
2003-07-28 | 17224 | fron | Took the bike to Power Sports for new fork seals and springs, tapered head bearings, and tuning. |
2003-10-23 | 17224 | engi | Got all parts back in the garage, ready for reassembly. Can't get the oil filter off, and I've tried everything I can think of. |
2006-06-15 | 17225 | body | Had a Tupperware Party at Dan Burrell's house. We got everything back together and running. |
2006-06-15 | 17225 | engi | The clutch wouldn't engage and Dan figured out that the stiffer springs recommended on the IPCRC list was the problem. We installed new stock springs and everything works fine. The shifter linkage came out while we were troubleshooting. Everyone learn |
2006-07-08 | 17225 | engi | Oil light came on during a short ride. Changing oil didn't fix the problem. I became very concerned when I started hearing a ticking sound from the engine. Based on advice from the list, I put a new oil pressure sending unit on (big job, small part) a |
2006-08-06 | 17332 | misc | Short ride to confirm that everything is OK. Discovered that I forgot to hook up the brake light in the wing, but that will have to wait. |
2006-09-20 | 17396 | engi | On my first real ride that ticking sound came back. Before I could stop, the ticking became a knocking. Loud. I had the first Honda oil pump failure in recorded history. I had purchased a new oil pump and was talked out of installing it. Too late now. |